|
|
Post by TA on Jun 21, 2003 13:28:14 GMT -5
Well, I did it. Bought a Colt Python. Born in 1980, Nickel, 6" bbl. Very nice! I tried to post a pic but was not able to  Now I've got to start looking for a 4" blue. You know, need some variety. ;D Dubbleakshun, I tried to post a pic on Gunmen II but also was unable to. It said that option was unavailable now. |
|
|
|
Post by DoubleAction on Jun 21, 2003 13:47:06 GMT -5
Thanks TA; I'll check it out and get back to you.
|
|
|
|
Post by DoubleAction on Jun 21, 2003 13:59:10 GMT -5
TA;I checked on it,the service provider for the site is doing some upgrades today,which is rare,and it should be completed later.Sorry for the inconveneince,we will be eagerly waiting for the pics.When you do it,click on "Pictures",and the "Create Album",then you will give a name to your album, and I will list it on the Left bar like all the others.I have an Owner's Review Page on the Python that you might want to read.There are things about the Python like no other double action revolver manufactured,there are very good reasons for it's accuracy and smoothness.You did well in obtaining one of these legendary handguns.
|
|
|
|
Post by DoubleAction on Jun 22, 2003 22:04:24 GMT -5
TA,Do Not Use Flitz on Nickel Plating.
|
|
|
|
Post by trapper on Jun 22, 2003 23:27:17 GMT -5
TA:
I am looking for a 4 inch Python, too. DA gave me the fever. I found a couple of them at recent gun show, but the prices were out of sight.
DA: This question has been asked a 100 times, but what is a good price on a 4 incher in like-new condition?
|
|
|
|
Post by TA on Jun 25, 2003 23:11:42 GMT -5
I think if you check out www.gunbroker.com and www.auctionarms.com, you will find older, as new Pythons going for upwards of $1000 and more  . I think Dubbleakshun said once before that anything below that is a good deal. The further below, the better the deal. What kind of prices were you seeing at the gun show? What condition, vintage, box/papers etc.? |
|
|
|
Post by DoubleAction on Jun 26, 2003 15:29:02 GMT -5
The prices on Pythons look like around $1,000 with a big "Unless" attached to it.The "unless" is a price on one that is sold by someone who is not up on the current markets,an original owner who has had the gun since new,seldom fired,and well kept.Some of these guns might be found by accident,from those owners only looking to recover their original investment,and those who are totally unfamiliar with the Python except the name.Estate sales are good places to look but beware of the $550. Pythons offered in display cases at gun shops.I was very lucky to pick up a new Blue 4" Python from a customer who had just bought it;that was 1994,he paid 550. for it and two months later I purchased it from him at $400.If someone offered me $1,000. for it,I would say no.I would search where gun buyers don't look and I would call every gun dealer within a hundred mile raidius of home base.Some areas suffer a more economic set back than others.Go to shows and watch for people bringing in the Colt factory boxes,those are desperation sales and you might find your pristine Python for $500. to $600.There are plenty of Pythons out there,they just have to be found.I would stay clear of one that has been shot out and used alot,restoration can be pricey and it will still be far from the original.
|
|
|
|
Post by Aussie on Jun 26, 2003 18:59:36 GMT -5
Whilst on the topic of purchasing Python's, can anyone please shed some light on the following:
I recall reading in a review recently that Colt quality control dropped a little in recent years. Is this true, or just one person's one-off bad experience?
Reason being as soon as my paperwork comes through, I will be looking for my very own .357 masterpiece, however I'm not sure whether to buy brand spanking new, or look for an older one that has been well cared for.
Thanks for any advice.
|
|
|
|
Post by DoubleAction on Jun 26, 2003 19:36:45 GMT -5
Aussie;Quality control at Colt has never been better than it is now,especially with the Python.Sometime ago Reitired Marine General William Keyes accepted the job of Chief Executive Officer at Colt Firearms and since has decided to include the Python as a priority along with the 1911.My brother purchased one of their new Pythons and it is worth every penny that he spent for it,and more.I purchased a re-issued series 70 Colt Government model that is one of the best fitted 1911s that I've seen Colt make,and extremely accurate.Colt is working very hard with a new management that truly believes in the firearms that they manufacture.I purchased two of their pistols last year and have no questions regarding any issues concerning quality or craftsmanship.
|
|
|
|
Post by cnemikeman on Jun 26, 2003 20:43:10 GMT -5
I went to a gunstore this past Tuesday, and lo and behold, in the counter was a nice shiny Python. Knowing they are scarce, I looked at the price. It was listed as 1300 FIRM. Ok... guess I won't be getting one of them as soon as I thought. D#$n, that's a TON of cash. I love the gun, but man, that smarts. MiKeMaN |
|
|
|
Post by DoubleAction on Jun 27, 2003 16:30:46 GMT -5
MikeMan;That Python must be an Ultra Bright Stainless or the dealer must cater to wealthy collectors who use him for pricing.We have such dealers on the wealthy side of the city that marks everything up,especially Pythons and Colt Single Action Army Models.My brother just paid under $1,000. for a new stainless Python from our shooting range.Don't get discouraged by this one gun,something else is going on.
|
|
Now I've got to start looking for a 4" blue. You know, need some variety. ;D
. I think Dubbleakshun said once before that anything below that is a good deal. The further below, the better the deal.
